setup-browser-cookies

> Reference-only note: 이 저장소는 upstream `gstack`의 한국어 문서 레이어입니다. 아래 내용은 upstream 설치본을 기준으로 한 reference이며, 실제 실행은 upstream 환경을 따라야 합니다.

## Preamble (run first)

```bash
_UPD=$(~/.claude/skills/gstack/bin/gstack-update-check 2>/dev/null || .claude/skills/gstack/bin/gstack-update-check 2>/dev/null || true)
[ -n "$_UPD" ] && echo "$_UPD" || true
mkdir -p ~/.gstack/sessions
touch ~/.gstack/sessions/"$PPID"
_SESSIONS=$(find ~/.gstack/sessions -mmin -120 -type f 2>/dev/null | wc -l | tr -d ' ')
find ~/.gstack/sessions -mmin +120 -type f -delete 2>/dev/null || true
_CONTRIB=$(~/.claude/skills/gstack/bin/gstack-config get gstack_contributor 2>/dev/null || true)
_PROACTIVE=$(~/.claude/skills/gstack/bin/gstack-config get proactive 2>/dev/null || echo "true")
_BRANCH=$(git branch --show-current 2>/dev/null || echo "unknown")
echo "BRANCH: $_BRANCH"
echo "PROACTIVE: $_PROACTIVE"
source <(~/.claude/skills/gstack/bin/gstack-repo-mode 2>/dev/null) || true
REPO_MODE=${REPO_MODE:-unknown}
echo "REPO_MODE: $REPO_MODE"
_LAKE_SEEN=$([ -f ~/.gstack/.completeness-intro-seen ] && echo "yes" || echo "no")
echo "LAKE_INTRO: $_LAKE_SEEN"
_TEL=$(~/.claude/skills/gstack/bin/gstack-config get telemetry 2>/dev/null || true)
_TEL_PROMPTED=$([ -f ~/.gstack/.telemetry-prompted ] && echo "yes" || echo "no")
_TEL_START=$(date +%s)
_SESSION_ID="$$-$(date +%s)"
echo "TELEMETRY: ${_TEL:-off}"
echo "TEL_PROMPTED: $_TEL_PROMPTED"
mkdir -p ~/.gstack/analytics
echo '{"skill":"setup-browser-cookies","ts":"'$(date -u +%Y-%m-%dT%H:%M:%SZ)'","repo":"'$(basename "$(git rev-parse --show-toplevel 2>/dev/null)" 2>/dev/null || echo "unknown")'"}'  >> ~/.gstack/analytics/skill-usage.jsonl 2>/dev/null || true
# zsh-compatible: use find instead of glob to avoid NOMATCH error
for _PF in $(find ~/.gstack/analytics -maxdepth 1 -name '.pending-*' 2>/dev/null); do [ -f "$_PF" ] && ~/.claude/skills/gstack/bin/gstack-telemetry-log --event-type skill_run --skill _pending_finalize --outcome unknown --session-id "$_SESSION_ID" 2>/dev/null || true; break; done
```

If `PROACTIVE` is `"false"`, do not proactively suggest gstack skills — only invoke
them when the user explicitly asks. The user opted out of proactive suggestions.

If output shows `UPGRADE_AVAILABLE <old> <new>`: read `~/.claude/skills/gstack/gstack-upgrade/SKILL.md` and follow the "Inline upgrade flow" (auto-upgrade if configured, otherwise AskUserQuestion with 4 options, write snooze state if declined). If `JUST_UPGRADED <from> <to>`: tell user "Running gstack v{to} (just updated!)" and continue.

If `LAKE_INTRO` is `no`: Before continuing, introduce the Completeness Principle.
Tell the user: "gstack follows the **Boil the Lake** principle — always do the complete
thing when AI makes the marginal cost near-zero. Read more: https://garryslist.org/posts/boil-the-ocean"
Then offer to open the essay in their default browser:

```bash
open https://garryslist.org/posts/boil-the-ocean
touch ~/.gstack/.completeness-intro-seen
```

Only run `open` if the user says yes. Always run `touch` to mark as seen. This only happens once.

If `TEL_PROMPTED` is `no` AND `LAKE_INTRO` is `yes`: After the lake intro is handled,
ask the user about telemetry. Use AskUserQuestion:

> Help gstack get better! Community mode shares usage data (which skills you use, how long
> they take, crash info) with a stable device ID so we can track trends and fix bugs faster.
> No code, file paths, or repo names are ever sent.
> Change anytime with `gstack-config set telemetry off`.

Options:
- A) Help gstack get better! (recommended)
- B) No thanks

If A: run `~/.claude/skills/gstack/bin/gstack-config set telemetry community`

If B: ask a follow-up AskUserQuestion:

> How about anonymous mode? We just learn that *someone* used gstack — no unique ID,
> no way to connect sessions. Just a counter that helps us know if anyone's out there.

Options:
- A) Sure, anonymous is fine
- B) No thanks, fully off

If B→A: run `~/.claude/skills/gstack/bin/gstack-config set telemetry anonymous`
If B→B: run `~/.claude/skills/gstack/bin/gstack-config set telemetry off`

Always run:
```bash
touch ~/.gstack/.telemetry-prompted
```

This only happens once. If `TEL_PROMPTED` is `yes`, skip this entirely.

## Contributor Mode

If `_CONTRIB` is `true`: you are in **contributor mode**. At the end of each major workflow step, rate your gstack experience 0-10. If not a 10 and there's an actionable bug or improvement — file a field report.

**File only:** gstack tooling bugs where the input was reasonable but gstack failed. **Skip:** user app bugs, network errors, auth failures on user's site.

**To file:** write `~/.gstack/contributor-logs/{slug}.md`:
```
# {Title}
**What I tried:** {action} | **What happened:** {result} | **Rating:** {0-10}
## Repro
1. {step}
## What would make this a 10
{one sentence}
**Date:** {YYYY-MM-DD} | **Version:** {version} | **Skill:** /{skill}
```
Slug: lowercase hyphens, max 60 chars. Skip if exists. Max 3/session. File inline, don't stop.

## Completion Status Protocol

When completing a skill workflow, report status using one of:
- **DONE** — All steps completed successfully. Evidence provided for each claim.
- **DONE_WITH_CONCERNS** — Completed, but with issues the user should know about. List each concern.
- **BLOCKED** — Cannot proceed. State what is blocking and what was tried.
- **NEEDS_CONTEXT** — Missing information required to continue. State exactly what you need.

### Escalation

It is always OK to stop and say "this is too hard for me" or "I'm not confident in this result."

Bad work is worse than no work. You will not be penalized for escalating.
- If you have attempted a task 3 times without success, STOP and escalate.
- If you are uncertain about a security-sensitive change, STOP and escalate.
- If the scope of work exceeds what you can verify, STOP and escalate.

Escalation format:
```
STATUS: BLOCKED | NEEDS_CONTEXT
REASON: [1-2 sentences]
ATTEMPTED: [what you tried]
RECOMMENDATION: [what the user should do next]
```

## Telemetry (run last)

After the skill workflow completes (success, error, or abort), log the telemetry event.
Determine the skill name from the `name:` field in this file's YAML frontmatter.
Determine the outcome from the workflow result (success if completed normally, error
if it failed, abort if the user interrupted).

**PLAN MODE EXCEPTION — ALWAYS RUN:** This command writes telemetry to
`~/.gstack/analytics/` (user config directory, not project files). The skill
preamble already writes to the same directory — this is the same pattern.
Skipping this command loses session duration and outcome data.

Run this bash:

```bash
_TEL_END=$(date +%s)
_TEL_DUR=$(( _TEL_END - _TEL_START ))
rm -f ~/.gstack/analytics/.pending-"$_SESSION_ID" 2>/dev/null || true
~/.claude/skills/gstack/bin/gstack-telemetry-log \
  --skill "SKILL_NAME" --duration "$_TEL_DUR" --outcome "OUTCOME" \
  --used-browse "USED_BROWSE" --session-id "$_SESSION_ID" 2>/dev/null &
```

Replace `SKILL_NAME` with the actual skill name from frontmatter, `OUTCOME` with
success/error/abort, and `USED_BROWSE` with true/false based on whether `$B` was used.
If you cannot determine the outcome, use "unknown". This runs in the background and
never blocks the user.

## Plan Status Footer

When you are in plan mode and about to call ExitPlanMode:

1. Check if the plan file already has a `## GSTACK REVIEW REPORT` section.
2. If it DOES — skip (a review skill already wrote a richer report).
3. If it does NOT — run this command:

\`\`\`bash
~/.claude/skills/gstack/bin/gstack-review-read
\`\`\`

Then write a `## GSTACK REVIEW REPORT` section to the end of the plan file:

- If the output contains review entries (JSONL lines before `---CONFIG---`): format the
  standard report table with runs/status/findings per skill, same format as the review
  skills use.
- If the output is `NO_REVIEWS` or empty: write this placeholder table:

\`\`\`markdown
## GSTACK REVIEW REPORT

| Review | Trigger | Why | Runs | Status | Findings |
|--------|---------|-----|------|--------|----------|
| CEO Review | \`/plan-ceo-review\` | Scope & strategy | 0 | — | — |
| Codex Review | \`/codex review\` | Independent 2nd opinion | 0 | — | — |
| Eng Review | \`/plan-eng-review\` | Architecture & tests (required) | 0 | — | — |
| Design Review | \`/plan-design-review\` | UI/UX gaps | 0 | — | — |

**VERDICT:** NO REVIEWS YET — run \`/autoplan\` for full review pipeline, or individual reviews above.
\`\`\`

**PLAN MODE EXCEPTION — ALWAYS RUN:** This writes to the plan file, which is the one
file you are allowed to edit in plan mode. The plan file review report is part of the
plan's living status.

# Setup Browser Cookies

Import logged-in sessions from your real Chromium browser into the headless browse session.

## How it works

1. Find the browse binary
2. Run `cookie-import-browser` to detect installed browsers and open the picker UI
3. User selects which cookie domains to import in their browser
4. Cookies are decrypted and loaded into the Playwright session

## Steps

### 1. Find the browse binary

## SETUP (run this check BEFORE any browse command)

```bash
_ROOT=$(git rev-parse --show-toplevel 2>/dev/null)
B=""
[ -n "$_ROOT" ] && [ -x "$_ROOT/.claude/skills/gstack/browse/dist/browse" ] && B="$_ROOT/.claude/skills/gstack/browse/dist/browse"
[ -z "$B" ] && B=~/.claude/skills/gstack/browse/dist/browse
if [ -x "$B" ]; then
  echo "READY: $B"
else
  echo "NEEDS_SETUP"
fi
```

If `NEEDS_SETUP`:
1. Tell the user: "gstack browse needs a one-time build (~10 seconds). OK to proceed?" Then STOP and wait.
2. Run: `cd <SKILL_DIR> && ./setup`
3. If `bun` is not installed: `curl -fsSL https://bun.sh/install | bash`

### 2. Open the cookie picker

```bash
$B cookie-import-browser
```

This auto-detects installed Chromium browsers and opens
an interactive picker UI in your default browser where you can:
- Switch between installed browsers
- Search domains
- Click "+" to import a domain's cookies
- Click trash to remove imported cookies

Tell the user: **"Cookie picker opened — select the domains you want to import in your browser, then tell me when you're done."**

### 3. Direct import (alternative)

If the user specifies a domain directly (e.g., `/setup-browser-cookies github.com`), skip the UI:

```bash
$B cookie-import-browser comet --domain github.com
```

Replace `comet` with the appropriate browser if specified.

### 4. Verify

After the user confirms they're done:

```bash
$B cookies
```

Show the user a summary of imported cookies (domain counts).

## Notes

- On macOS, the first import per browser may trigger a Keychain dialog — click "Allow" / "Always Allow"
- On Linux, `v11` cookies may require `secret-tool`/libsecret access; `v10` cookies use Chromium's standard fallback key
- Cookie picker is served on the same port as the browse server (no extra process)
- Only domain names and cookie counts are shown in the UI — no cookie values are exposed
- The browse session persists cookies between commands, so imported cookies work immediately