omd-setup

# OMD Setup

This skill is a **setup wizard**. Ignore unrelated context (open files, pending code changes, git/commits, etc.).

**When you need to ask the user anything, use the `AskUser` tool and ONLY ask the wizard questions below.**

This is the **only command you need to learn**. After running this, everything else is automatic.

## Graceful Interrupt Handling

**IMPORTANT**: This setup process saves progress after each step. If interrupted (Ctrl+C or connection loss), the setup can resume from where it left off.

### State File Location
- `.omd/state/setup-state.json` - Tracks completed steps

### Resume Detection (Step 0)

Before starting any step, check for existing state:

```bash
# Check for existing setup state
STATE_FILE=".omd/state/setup-state.json"

# Cross-platform ISO date to epoch conversion
iso_to_epoch() {
  local iso_date="$1"
  local epoch=""
  # Try GNU date first (Linux)
  epoch=$(date -d "$iso_date" +%s 2>/dev/null)
  if [ $? -eq 0 ] && [ -n "$epoch" ]; then
    echo "$epoch"
    return 0
  fi
  # Try BSD/macOS date
  local clean_date=$(echo "$iso_date" | sed 's/[+-][0-9][0-9]:[0-9][0-9]$//' | sed 's/Z$//' | sed 's/T/ /')
  epoch=$(date -j -f "%Y-%m-%d %H:%M:%S" "$clean_date" +%s 2>/dev/null)
  if [ $? -eq 0 ] && [ -n "$epoch" ]; then
    echo "$epoch"
    return 0
  fi
  echo "0"
}

if [ -f "$STATE_FILE" ]; then
  # Check if state is stale (older than 24 hours)
  TIMESTAMP_RAW=$(jq -r '.timestamp // empty' "$STATE_FILE" 2>/dev/null)
  if [ -n "$TIMESTAMP_RAW" ]; then
    TIMESTAMP_EPOCH=$(iso_to_epoch "$TIMESTAMP_RAW")
    NOW_EPOCH=$(date +%s)
    STATE_AGE=$((NOW_EPOCH - TIMESTAMP_EPOCH))
  else
    STATE_AGE=999999  # Force fresh start if no timestamp
  fi
  if [ "$STATE_AGE" -gt 86400 ]; then
    echo "Previous setup state is more than 24 hours old. Starting fresh."
    rm -f "$STATE_FILE"
  else
    LAST_STEP=$(jq -r ".lastCompletedStep // 0" "$STATE_FILE" 2>/dev/null || echo "0")
    TIMESTAMP=$(jq -r .timestamp "$STATE_FILE" 2>/dev/null || echo "unknown")
    echo "Found previous setup session (Step $LAST_STEP completed at $TIMESTAMP)"
  fi
fi
```

If state exists, use `AskUser` to prompt **exactly**:

1. [question] Found a previous setup session. What should I do?
[topic] Resume
[option] Resume from last step
[option] Start fresh (clear saved state)

If user chooses "Start fresh":
```bash
rm -f ".omd/state/setup-state.json"
echo "Previous state cleared. Starting fresh setup."
```

### Step 0.5: Always Ask Parallelism (Required)

**MANDATORY:** Regardless of whether the user resumes or starts fresh, you MUST ask for `maxBackgroundTasks` in this run.

If resuming, try to infer the scope from the state file:

```bash
# Optional: infer scope from state file
CONFIG_TYPE=$(jq -r '.configType // empty' ".omd/state/setup-state.json" 2>/dev/null || true)
```

Interpretation:
- If `CONFIG_TYPE` starts with `local` → scope = `Local (this project)`
- If `CONFIG_TYPE` starts with `global` → scope = `Global (all projects)`
- Otherwise, ask Step 1 (scope) again.

### Save Progress Helper

After completing each major step, save progress:

```bash
# Save setup progress (call after each step)
# Usage: save_setup_progress STEP_NUMBER
save_setup_progress() {
  mkdir -p .omd/state
  cat > ".omd/state/setup-state.json" << EOF
{
  "lastCompletedStep": $1,
  "timestamp": "$(date -Iseconds)",
  "configType": "${CONFIG_TYPE:-unknown}"
}
EOF
}
```

### Clear State on Completion

After successful setup completion (Step 7/8), remove the state file:

```bash
rm -f ".omd/state/setup-state.json"
echo "Setup completed successfully. State cleared."
```

## Usage Modes

This skill handles three scenarios:

1. **Initial Setup (no flags)**: First-time installation wizard
2. **Local Configuration (`--local`)**: Configure project-specific settings (.factory/FACTORY.md)
3. **Global Configuration (`--global`)**: Configure global settings (~/.factory/FACTORY.md)

## Mode Detection

Check for flags in the user's invocation:
- If `--local` flag present → Skip to Local Configuration (Step 2A)
- If `--global` flag present → Skip to Global Configuration (Step 2B)
- If no flags → Run Initial Setup wizard (Step 1)

**IMPORTANT:** Always run Step 1.1 (parallelism) even when `--local` or `--global` is used.

## Step 1: Initial Setup Wizard (Default Behavior)

**Note**: If resuming and lastCompletedStep >= 1, skip to the appropriate step based on configType.

Immediately use `AskUser` to prompt **exactly**:

1. [question] Where should I configure oh-my-droid?
[topic] Scope
[option] Local (this project)
[option] Global (all projects)

## Step 1.1: Configure Parallelism (maxBackgroundTasks)

**IMPORTANT:** Always run this step (even if `maxBackgroundTasks` is already set, and even when resuming).

Use `AskUser` to prompt:

1. [question] How many background tasks should I allow in parallel?
[topic] Parallelism
[option] Keep current
[option] 2
[option] 5
[option] 10
[option] 20

If the user chooses **Keep current**, skip updating settings.

Otherwise, update BOTH:

1) **Factory Droid global settings**: `~/.factory/settings.json` → top-level `maxBackgroundTasks`
2) **oh-my-droid config** (so OMD can read it):
   - If scope is **Local** → `./.factory/droid.jsonc` → `permissions.maxBackgroundTasks`
   - If scope is **Global** → `${XDG_CONFIG_HOME:-~/.config}/oh-my-droid/config.jsonc` → `permissions.maxBackgroundTasks`

Rules:
- Default to **5** if the user provides an invalid value
- Clamp to **1..20**

```bash
python3 - <<'PY'
import json
import os
import re
from pathlib import Path

MIN_V = 1
MAX_V = 20
DEFAULT_V = 5

def strip_jsonc(text: str) -> str:
  out: list[str] = []
  i = 0
  in_str = False
  str_ch = ''
  while i < len(text):
    c = text[i]
    if in_str:
      out.append(c)
      if c == '\\' and i + 1 < len(text):
        i += 1
        out.append(text[i])
      elif c == str_ch:
        in_str = False
      i += 1
      continue

    if c in ('"', "'"):
      in_str = True
      str_ch = c
      out.append(c)
      i += 1
      continue

    if c == '/' and i + 1 < len(text) and text[i + 1] == '/':
      i += 2
      while i < len(text) and text[i] not in ('\n', '\r'):
        i += 1
      continue

    if c == '/' and i + 1 < len(text) and text[i + 1] == '*':
      i += 2
      while i + 1 < len(text) and not (text[i] == '*' and text[i + 1] == '/'):
        i += 1
      i += 2
      continue

    out.append(c)
    i += 1

  return ''.join(out)

def parse_jsonc_file(path: Path) -> dict:
  if not path.exists():
    return {}
  raw = path.read_text('utf-8')
  cleaned = strip_jsonc(raw)
  cleaned = re.sub(r',\s*([}\]])', r'\1', cleaned)
  cleaned_s = cleaned.strip()
  if not cleaned_s:
    return {}
  return json.loads(cleaned_s)

factory_settings_path = Path.home() / '.factory' / 'settings.json'
factory_settings_path.parent.mkdir(parents=True, exist_ok=True)

try:
  factory_data = json.loads(factory_settings_path.read_text('utf-8')) if factory_settings_path.exists() else {}
except Exception:
  factory_data = {}

current = int(factory_data.get('maxBackgroundTasks', DEFAULT_V) or DEFAULT_V)

raw = "USER_CHOICE"  # replace with chosen value (or user's custom answer)
scope = "SCOPE_CHOICE"  # replace with: "Local (this project)" | "Global (all projects)" (or flags)
raw_s = str(raw).strip().lower()
if raw_s.startswith('keep'):
  v = current
else:
  try:
    v = int(raw_s)
  except Exception:
    v = current

if v < MIN_V:
  v = MIN_V
if v > MAX_V:
  v = MAX_V

# 1) Factory Droid settings (global)
factory_data['maxBackgroundTasks'] = v
factory_settings_path.write_text(json.dumps(factory_data, indent=2) + '\n', encoding='utf-8')
print('Set Factory maxBackgroundTasks to', v, 'in', factory_settings_path)

# 2) OMD config (local or global)
scope_s = str(scope).strip().lower()
if scope_s.startswith('local'):
  omd_config_path = Path.cwd() / '.factory' / 'droid.jsonc'
else:
  xdg = Path(os.environ.get('XDG_CONFIG_HOME') or (Path.home() / '.config'))
  omd_config_path = xdg / 'oh-my-droid' / 'config.jsonc'

omd_config_path.parent.mkdir(parents=True, exist_ok=True)

try:
  omd_data = parse_jsonc_file(omd_config_path)
except Exception as e:
  print('Warning: could not parse OMD config; skipping update:', omd_config_path, '-', e)
  omd_data = None

if isinstance(omd_data, dict):
  perms = omd_data.get('permissions')
  if not isinstance(perms, dict):
    perms = {}
  perms['maxBackgroundTasks'] = v
  omd_data['permissions'] = perms
  omd_config_path.write_text(json.dumps(omd_data, indent=2) + '\n', encoding='utf-8')
  print('Set OMD permissions.maxBackgroundTasks to', v, 'in', omd_config_path)
PY
```

## Step 2A: Local Configuration (--local flag or user chose LOCAL)

**CRITICAL**: This ALWAYS downloads fresh FACTORY.md from GitHub to the local project. DO NOT use the Write tool - use bash curl exclusively.

### Create Local .factory Directory

```bash
# Create .factory directory in current project
mkdir -p .factory && echo ".factory directory ready"
```

### Download Fresh FACTORY.md

```bash
# Extract old version before download
OLD_VERSION=$(grep -m1 "^# oh-my-droid" .factory/FACTORY.md 2>/dev/null | grep -oE 'v[0-9]+\.[0-9]+\.[0-9]+' || echo "none")

# Backup existing FACTORY.md before overwriting (if it exists)
if [ -f ".factory/FACTORY.md" ]; then
  BACKUP_DATE=$(date +%Y-%m-%d)
  BACKUP_PATH=".factory/FACTORY.md.backup.${BACKUP_DATE}"
  cp .factory/FACTORY.md "$BACKUP_PATH"
  echo "Backed up existing FACTORY.md to $BACKUP_PATH"
fi

# Download fresh FACTORY.md from GitHub
curl -fsSL "https://raw.githubusercontent.com/MeroZemory/oh-my-droid/main/docs/FACTORY.md" -o .factory/FACTORY.md && \
echo "Downloaded FACTORY.md to .factory/FACTORY.md"

# Extract new version and report
NEW_VERSION=$(grep -m1 "^# oh-my-droid" .factory/FACTORY.md 2>/dev/null | grep -oE 'v[0-9]+\.[0-9]+\.[0-9]+' || echo "unknown")
if [ "$OLD_VERSION" = "none" ]; then
  echo "Installed FACTORY.md: $NEW_VERSION"
elif [ "$OLD_VERSION" = "$NEW_VERSION" ]; then
  echo "FACTORY.md unchanged: $NEW_VERSION"
else
  echo "Updated FACTORY.md: $OLD_VERSION -> $NEW_VERSION"
fi
```

**Note**: The downloaded FACTORY.md includes Context Persistence instructions with `<remember>` tags for surviving conversation compaction.

**Note**: If an existing FACTORY.md is found, it will be backed up to `.factory/FACTORY.md.backup.YYYY-MM-DD` before downloading the new version.

**MANDATORY**: Always run this command. Do NOT skip. Do NOT use Write tool.

**FALLBACK** if curl fails:
Tell user to manually download from:
https://raw.githubusercontent.com/MeroZemory/oh-my-droid/main/docs/FACTORY.md

### Verify Plugin Installation

```bash
grep -q "oh-my-droid" ~/.factory/settings.json && echo "Plugin verified" || echo "Plugin NOT found - run: droid /plugin install oh-my-droid@oh-my-droid"
```

### Confirm Local Configuration Success

After completing local configuration, save progress and report:

```bash
# Save progress - Step 2 complete (Local config)
mkdir -p .omd/state
cat > ".omd/state/setup-state.json" << EOF
{
  "lastCompletedStep": 2,
  "timestamp": "$(date -Iseconds)",
  "configType": "local"
}
EOF
```

**OMC Project Configuration Complete**
- FACTORY.md: Updated with latest configuration from GitHub at ./.factory/FACTORY.md
- Backup: Previous FACTORY.md backed up to `.factory/FACTORY.md.backup.YYYY-MM-DD` (if existed)
- Scope: **PROJECT** - applies only to this project
- Hooks: Provided by plugin (no manual installation needed)
- Agents: 28+ available (base + tiered variants)
- Model routing: Haiku/Sonnet/Opus based on task complexity

**Note**: This configuration is project-specific and won't affect other projects or global settings.

If `--local` flag was used, clear state and **STOP HERE**:
```bash
rm -f ".omd/state/setup-state.json"
```
Do not continue to HUD setup or other steps.

## Step 2B: Global Configuration (--global flag or user chose GLOBAL)

**CRITICAL**: This ALWAYS downloads fresh FACTORY.md from GitHub to global config. DO NOT use the Write tool - use bash curl exclusively.

### Download Fresh FACTORY.md

```bash
# Extract old version before download
OLD_VERSION=$(grep -m1 "^# oh-my-droid" ~/.factory/FACTORY.md 2>/dev/null | grep -oE 'v[0-9]+\.[0-9]+\.[0-9]+' || echo "none")

# Backup existing FACTORY.md before overwriting (if it exists)
if [ -f "$HOME/.factory/FACTORY.md" ]; then
  BACKUP_DATE=$(date +%Y-%m-%d)
  BACKUP_PATH="$HOME/.factory/FACTORY.md.backup.${BACKUP_DATE}"
  cp "$HOME/.factory/FACTORY.md" "$BACKUP_PATH"
  echo "Backed up existing FACTORY.md to $BACKUP_PATH"
fi

# Download fresh FACTORY.md to global config
curl -fsSL "https://raw.githubusercontent.com/MeroZemory/oh-my-droid/main/docs/FACTORY.md" -o ~/.factory/FACTORY.md && \
echo "Downloaded FACTORY.md to ~/.factory/FACTORY.md"

# Extract new version and report
NEW_VERSION=$(grep -m1 "^# oh-my-droid" ~/.factory/FACTORY.md 2>/dev/null | grep -oE 'v[0-9]+\.[0-9]+\.[0-9]+' || echo "unknown")
if [ "$OLD_VERSION" = "none" ]; then
  echo "Installed FACTORY.md: $NEW_VERSION"
elif [ "$OLD_VERSION" = "$NEW_VERSION" ]; then
  echo "FACTORY.md unchanged: $NEW_VERSION"
else
  echo "Updated FACTORY.md: $OLD_VERSION -> $NEW_VERSION"
fi
```

**Note**: If an existing FACTORY.md is found, it will be backed up to `~/.factory/FACTORY.md.backup.YYYY-MM-DD` before downloading the new version.

### Clean Up Legacy Hooks (if present)

Check if old manual hooks exist and remove them to prevent duplicates:

```bash
# Remove legacy bash hook scripts (now handled by plugin system)
rm -f ~/.factory/hooks/keyword-detector.sh
rm -f ~/.factory/hooks/stop-continuation.sh
rm -f ~/.factory/hooks/persistent-mode.sh
rm -f ~/.factory/hooks/session-start.sh
echo "Legacy hooks cleaned"
```

Check `~/.factory/settings.json` for manual hook entries. If the "hooks" key exists with UserPromptSubmit, Stop, or SessionStart entries pointing to bash scripts, inform the user:

> **Note**: Found legacy hooks in settings.json. These should be removed since the plugin now provides hooks automatically. Remove the "hooks" section from ~/.factory/settings.json to prevent duplicate hook execution.

### Verify Plugin Installation

```bash
grep -q "oh-my-droid" ~/.factory/settings.json && echo "Plugin verified" || echo "Plugin NOT found - run: droid /plugin install oh-my-droid@oh-my-droid"
```

### Confirm Global Configuration Success

After completing global configuration, save progress and report:

```bash
# Save progress - Step 2 complete (Global config)
mkdir -p .omd/state
cat > ".omd/state/setup-state.json" << EOF
{
  "lastCompletedStep": 2,
  "timestamp": "$(date -Iseconds)",
  "configType": "global"
}
EOF
```

**OMC Global Configuration Complete**
- FACTORY.md: Updated with latest configuration from GitHub at ~/.factory/FACTORY.md
- Backup: Previous FACTORY.md backed up to `~/.factory/FACTORY.md.backup.YYYY-MM-DD` (if existed)
- Scope: **GLOBAL** - applies to all Factory Droid sessions
- Hooks: Provided by plugin (no manual installation needed)
- Agents: 28+ available (base + tiered variants)
- Model routing: Haiku/Sonnet/Opus based on task complexity

**Note**: Hooks are now managed by the plugin system automatically. No manual hook installation required.

If `--global` flag was used, clear state and **STOP HERE**:
```bash
rm -f ".omd/state/setup-state.json"
```
Do not continue to HUD setup or other steps.

## Step 3: Setup HUD Statusline

**Note**: If resuming and lastCompletedStep >= 3, skip to Step 3.5.

The HUD shows real-time status in Factory Droid's status bar. **Invoke the hud skill** to set up and configure:

Use the Skill tool to invoke: `hud` with args: `setup`

This will:
1. Install the HUD wrapper script to `~/.factory/hud/omd-hud.mjs`
2. Configure `statusLine` in `~/.factory/settings.json`
3. Report status and prompt to restart if needed

After HUD setup completes, save progress:
```bash
# Save progress - Step 3 complete (HUD setup)
mkdir -p .omd/state
CONFIG_TYPE=$(cat ".omd/state/setup-state.json" 2>/dev/null | grep -oE '"configType":\s*"[^"]+"' | cut -d'"' -f4 || echo "unknown")
cat > ".omd/state/setup-state.json" << EOF
{
  "lastCompletedStep": 3,
  "timestamp": "$(date -Iseconds)",
  "configType": "$CONFIG_TYPE"
}
EOF
```

## Step 3.5: Clear Stale Plugin Cache

Clear old cached plugin versions to avoid conflicts:

```bash
# Clear stale plugin cache versions
CACHE_DIR="$HOME/.factory/plugins/cache/oh-my-droid/oh-my-droid"
if [ -d "$CACHE_DIR" ]; then
  LATEST=$(ls -1 "$CACHE_DIR" | sort -V | tail -1)
  CLEARED=0
  for dir in "$CACHE_DIR"/*; do
    if [ "$(basename "$dir")" != "$LATEST" ]; then
      rm -rf "$dir"
      CLEARED=$((CLEARED + 1))
    fi
  done
  [ $CLEARED -gt 0 ] && echo "Cleared $CLEARED stale cache version(s)" || echo "Cache is clean"
else
  echo "No cache directory found (normal for new installs)"
fi
```

## Step 3.6: Check for Updates

Notify user if a newer version is available:

```bash
# Detect installed version
INSTALLED_VERSION=""

# Try cache directory first
if [ -d "$HOME/.factory/plugins/cache/oh-my-droid/oh-my-droid" ]; then
  INSTALLED_VERSION=$(ls -1 "$HOME/.factory/plugins/cache/oh-my-droid/oh-my-droid" | sort -V | tail -1)
fi

# Try .omd-version.json second
if [ -z "$INSTALLED_VERSION" ] && [ -f ".omd-version.json" ]; then
  INSTALLED_VERSION=$(grep -oE '"version":\s*"[^"]+' .omd-version.json | cut -d'"' -f4)
fi

# Try FACTORY.md header third (local first, then global)
if [ -z "$INSTALLED_VERSION" ]; then
  if [ -f ".factory/FACTORY.md" ]; then
    INSTALLED_VERSION=$(grep -m1 "^# oh-my-droid" .factory/FACTORY.md 2>/dev/null | grep -oE 'v[0-9]+\.[0-9]+\.[0-9]+' | sed 's/^v//')
  elif [ -f "$HOME/.factory/FACTORY.md" ]; then
    INSTALLED_VERSION=$(grep -m1 "^# oh-my-droid" "$HOME/.factory/FACTORY.md" 2>/dev/null | grep -oE 'v[0-9]+\.[0-9]+\.[0-9]+' | sed 's/^v//')
  fi
fi

# Check npm for latest version
LATEST_VERSION=$(npm view oh-my-droid version 2>/dev/null)

if [ -n "$INSTALLED_VERSION" ] && [ -n "$LATEST_VERSION" ]; then
  # Simple version comparison (assumes semantic versioning)
  if [ "$INSTALLED_VERSION" != "$LATEST_VERSION" ]; then
    echo ""
    echo "UPDATE AVAILABLE:"
    echo "  Installed: v$INSTALLED_VERSION"
    echo "  Latest:    v$LATEST_VERSION"
    echo ""
    echo "To update, run: droid /plugin install oh-my-droid@oh-my-droid"
  else
    echo "You're on the latest version: v$INSTALLED_VERSION"
  fi
elif [ -n "$LATEST_VERSION" ]; then
  echo "Latest version available: v$LATEST_VERSION"
fi
```

## Step 3.7: Enable Background Processes (Required)

Background processes are required for true parallel shell execution (e.g., running multiple long `Execute` commands concurrently).

This must be set globally in `~/.factory/settings.json` (there is no per-project equivalent).

```bash
python3 - <<'PY'
import json
from pathlib import Path

settings_path = Path.home() / '.factory' / 'settings.json'
settings_path.parent.mkdir(parents=True, exist_ok=True)

try:
  data = json.loads(settings_path.read_text('utf-8')) if settings_path.exists() else {}
except Exception:
  data = {}

data['allowBackgroundProcesses'] = True
settings_path.write_text(json.dumps(data, indent=2) + '\n', encoding='utf-8')
print('Enabled allowBackgroundProcesses in', settings_path)
print('NOTE: You may need to restart Droid (or start with --allow-background-processes) for it to take effect.')
PY
```

If the user wants to use background processes immediately in the current session and it still reports "Fire and forget is disabled", instruct them to restart Droid.

## Step 3.8: Set Default Execution Mode

Use `AskUser` to prompt:

1. [question] Which execution mode should be the default when I interpret requests like "fast" / "parallel"?
[topic] Default-Mode
[option] ultrawork
[option] ecomode

Store the preference in `~/.factory/.omd-config.json`:

```bash
# Read existing config or create empty object
CONFIG_FILE="$HOME/.factory/.omd-config.json"
mkdir -p "$(dirname "$CONFIG_FILE")"

if [ -f "$CONFIG_FILE" ]; then
  EXISTING=$(cat "$CONFIG_FILE")
else
  EXISTING='{}'
fi

# Set defaultExecutionMode (replace USER_CHOICE with "ultrawork" or "ecomode")
echo "$EXISTING" | jq --arg mode "USER_CHOICE" '. + {defaultExecutionMode: $mode, configuredAt: (now | todate)}' > "$CONFIG_FILE"
echo "Default execution mode set to: USER_CHOICE"
```

**Note**: This preference ONLY affects generic keywords ("fast", "parallel"). Explicit keywords ("ulw", "eco") always override this preference.

## Step 3.9: Install CLI Analytics Tools (Optional)

The OMD CLI provides standalone token analytics commands (`omd stats`, `omd agents`, `omd tui`).

Ask user: "Would you like to install the OMD CLI for standalone analytics? (Recommended for tracking token usage and costs)"

**Options:**
1. **Yes (Recommended)** - Install CLI tools globally for `omd stats`, `omd agents`, etc.
2. **No** - Skip CLI installation, use only plugin skills

### CLI Installation Note

The CLI (`omc` command) is **no longer supported** via npm/bun global install.

All functionality is available through the plugin system:
- Use `/help` for guidance
- Use `/doctor` for diagnostics

Skip this step - the plugin provides all features.

## Step 4: Verify Plugin Installation

```bash
grep -q "oh-my-droid" ~/.factory/settings.json && echo "Plugin verified" || echo "Plugin NOT found - run: droid /plugin install oh-my-droid@oh-my-droid"
```

## Step 5: Offer MCP Server Configuration

MCP servers extend Factory Droid with additional tools (web search, GitHub, etc.).

Ask user: "Would you like to configure MCP servers for enhanced capabilities? (Context7, Exa search, GitHub, etc.)"

If yes, invoke the mcp-setup skill:
```
/mcp-setup
```

If no, skip to next step.

## Step 6: Detect Upgrade from 2.x

Check if user has existing configuration:
```bash
# Check for existing 2.x artifacts
ls ~/.factory/commands/ralph-loop.md 2>/dev/null || ls ~/.factory/commands/ultrawork.md 2>/dev/null
```

If found, this is an upgrade from 2.x.

## Step 7: Show Welcome Message

### For New Users:

```
OMD Setup Complete!

You don't need to learn any commands. I now have intelligent behaviors that activate automatically.

WHAT HAPPENS AUTOMATICALLY:
- Complex tasks -> I parallelize and delegate to specialists
- "plan this" -> I start a planning interview
- "don't stop until done" -> I persist until verified complete
- "stop" or "cancel" -> I intelligently stop current operation

MAGIC KEYWORDS (optional power-user shortcuts):
Just include these words naturally in your request:

| Keyword | Effect | Example |
|---------|--------|---------|
| ralph | Persistence mode | "ralph: fix the auth bug" |
| ralplan | Iterative planning | "ralplan this feature" |
| ulw | Max parallelism | "ulw refactor the API" |
| eco | Token-efficient mode | "eco refactor the API" |
| plan | Planning interview | "plan the new endpoints" |

**ralph includes ultrawork:** When you activate ralph mode, it automatically includes ultrawork's parallel execution. No need to combine keywords.

MCP SERVERS:
Run /mcp-setup to add tools like web search, GitHub, etc.

HUD STATUSLINE:
The status bar now shows OMD state. Restart Factory Droid to see it.

CLI ANALYTICS (if installed):
- omc           - Full dashboard (stats + agents + cost)
- omd stats     - View token usage and costs
- omd agents    - See agent breakdown by cost
- omd tui       - Launch interactive TUI dashboard

That's it! Just use Factory Droid normally.
```

### For Users Upgrading from 2.x:

```
OMD Setup Complete! (Upgraded from 2.x)

GOOD NEWS: Your existing commands still work!
- /ralph, /ultrawork, /plan, etc. all still function

WHAT'S NEW in 3.0:
You no longer NEED those commands. Everything is automatic now:
- Just say "don't stop until done" instead of /ralph
- Just say "fast" or "parallel" instead of /ultrawork
- Just say "plan this" instead of /plan
- Just say "stop" instead of /cancel

MAGIC KEYWORDS (power-user shortcuts):
| Keyword | Same as old... | Example |
|---------|----------------|---------|
| ralph | /ralph | "ralph: fix the bug" |
| ralplan | /ralplan | "ralplan this feature" |
| ulw | /ultrawork | "ulw refactor API" |
| eco | (new!) | "eco fix all errors" |
| plan | /plan | "plan the endpoints" |

HUD STATUSLINE:
The status bar now shows OMD state. Restart Factory Droid to see it.

CLI ANALYTICS (if installed):
- omc           - Full dashboard (stats + agents + cost)
- omd stats     - View token usage and costs
- omd agents    - See agent breakdown by cost
- omd tui       - Launch interactive TUI dashboard

Your workflow won't break - it just got easier!
```

## Step 8: Ask About Starring Repository

First, check if `gh` CLI is available and authenticated:

```bash
gh auth status &>/dev/null
```

### If gh is available and authenticated:

Use `AskUser` to prompt:

1. [question] Would you like to star the oh-my-droid GitHub repo?
[topic] Star
[option] Yes, star it
[option] No
[option] Maybe later

If user chooses "Yes, star it!":

```bash
gh api -X PUT /user/starred/MeroZemory/oh-my-droid 2>/dev/null && echo "Thanks for starring! ⭐" || true
```

**Note:** Fail silently if the API call doesn't work - never block setup completion.

### If gh is NOT available or not authenticated:

```bash
echo ""
echo "If you enjoy oh-my-droid, consider starring the repo:"
echo "  https://github.com/MeroZemory/oh-my-droid"
echo ""
```

### Clear Setup State on Completion

After Step 8 completes (regardless of star choice), clear the setup state:

```bash
# Setup complete - clear state file
rm -f ".omd/state/setup-state.json"
echo "Setup completed successfully!"
```

## Keeping Up to Date

After installing oh-my-droid updates (via npm or plugin update), run:
- `/omd-setup --local` to update project config
- `/omd-setup --global` to update global config

This ensures you have the newest features and agent configurations.

## Help Text

When user runs `/omd-setup --help` or just `--help`, display:

```
OMD Setup - Configure oh-my-droid

USAGE:
  /omd-setup           Run initial setup wizard
  /omd-setup --local   Configure local project (.factory/FACTORY.md)
  /omd-setup --global  Configure global settings (~/.factory/FACTORY.md)
  /omd-setup --help    Show this help

MODES:
  Initial Setup (no flags)
    - Interactive wizard for first-time setup
    - Configures FACTORY.md (local or global)
    - Sets up HUD statusline
    - Checks for updates
    - Offers MCP server configuration

  Local Configuration (--local)
    - Downloads fresh FACTORY.md to ./.factory/
    - Backs up existing FACTORY.md to .factory/FACTORY.md.backup.YYYY-MM-DD
    - Project-specific settings
    - Use this to update project config after OMC upgrades

  Global Configuration (--global)
    - Downloads fresh FACTORY.md to ~/.factory/
    - Backs up existing FACTORY.md to ~/.factory/FACTORY.md.backup.YYYY-MM-DD
    - Applies to all Factory Droid sessions
    - Cleans up legacy hooks
    - Use this to update global config after OMC upgrades

EXAMPLES:
  /omd-setup           # First time setup
  /omd-setup --local   # Update this project
  /omd-setup --global  # Update all projects

For more info: https://github.com/MeroZemory/oh-my-droid
```