network-101
Configure and test common network services (HTTP, HTTPS, SNMP, SMB) for penetration testing lab environments. Enable hands-on practice with service enumeration, log analysis, and security testing against properly configured target systems.
Best use case
network-101 is best used when you need a repeatable AI agent workflow instead of a one-off prompt. It is especially useful for teams working in multi. Configure and test common network services (HTTP, HTTPS, SNMP, SMB) for penetration testing lab environments. Enable hands-on practice with service enumeration, log analysis, and security testing against properly configured target systems.
Configure and test common network services (HTTP, HTTPS, SNMP, SMB) for penetration testing lab environments. Enable hands-on practice with service enumeration, log analysis, and security testing against properly configured target systems.
Users should expect a more consistent workflow output, faster repeated execution, and less time spent rewriting prompts from scratch.
Practical example
Example input
Use the "network-101" skill to help with this workflow task. Context: Configure and test common network services (HTTP, HTTPS, SNMP, SMB) for penetration testing lab environments. Enable hands-on practice with service enumeration, log analysis, and security testing against properly configured target systems.
Example output
A structured workflow result with clearer steps, more consistent formatting, and an output that is easier to reuse in the next run.
When to use this skill
- Use this skill when you want a reusable workflow rather than writing the same prompt again and again.
When not to use this skill
- Do not use this when you only need a one-off answer and do not need a reusable workflow.
- Do not use it if you cannot install or maintain the related files, repository context, or supporting tools.
Installation
Claude Code / Cursor / Codex
Manual Installation
- Download SKILL.md from GitHub
- Place it in
.claude/skills/network-101/SKILL.mdinside your project - Restart your AI agent — it will auto-discover the skill
How network-101 Compares
| Feature / Agent | network-101 | Standard Approach |
|---|---|---|
| Platform Support | Not specified | Limited / Varies |
| Context Awareness | High | Baseline |
| Installation Complexity | Unknown | N/A |
Frequently Asked Questions
What does this skill do?
Configure and test common network services (HTTP, HTTPS, SNMP, SMB) for penetration testing lab environments. Enable hands-on practice with service enumeration, log analysis, and security testing against properly configured target systems.
Where can I find the source code?
You can find the source code on GitHub using the link provided at the top of the page.
Related Guides
AI Agents for Coding
Browse AI agent skills for coding, debugging, testing, refactoring, code review, and developer workflows across Claude, Cursor, and Codex.
Best AI Skills for ChatGPT
Find the best AI skills to adapt into ChatGPT workflows for research, writing, summarization, planning, and repeatable assistant tasks.
AI Agent for Product Research
Browse AI agent skills for product research, competitive analysis, customer discovery, and structured product decision support.
SKILL.md Source
# Network 101
## Purpose
Configure and test common network services (HTTP, HTTPS, SNMP, SMB) for penetration testing lab environments. Enable hands-on practice with service enumeration, log analysis, and security testing against properly configured target systems.
## Inputs/Prerequisites
- Windows Server or Linux system for hosting services
- Kali Linux or similar for testing
- Administrative access to target system
- Basic networking knowledge (IP addressing, ports)
- Firewall access for port configuration
## Outputs/Deliverables
- Configured HTTP/HTTPS web server
- SNMP service with accessible communities
- SMB file shares with various permission levels
- Captured logs for analysis
- Documented enumeration results
## Core Workflow
### 1. Configure HTTP Server (Port 80)
Set up a basic HTTP web server for testing:
**Windows IIS Setup:**
1. Open IIS Manager (Internet Information Services)
2. Right-click Sites → Add Website
3. Configure site name and physical path
4. Bind to IP address and port 80
**Linux Apache Setup:**
```bash
# Install Apache
sudo apt update && sudo apt install apache2
# Start service
sudo systemctl start apache2
sudo systemctl enable apache2
# Create test page
echo "<html><body><h1>Test Page</h1></body></html>" | sudo tee /var/www/html/index.html
# Verify service
curl http://localhost
```
**Configure Firewall for HTTP:**
```bash
# Linux (UFW)
sudo ufw allow 80/tcp
# Windows PowerShell
New-NetFirewallRule -DisplayName "HTTP" -Direction Inbound -Protocol TCP -LocalPort 80 -Action Allow
```
### 2. Configure HTTPS Server (Port 443)
Set up secure HTTPS with SSL/TLS:
**Generate Self-Signed Certificate:**
```bash
# Linux - Generate certificate
sudo openssl req -x509 -nodes -days 365 -newkey rsa:2048 \
-keyout /etc/ssl/private/apache-selfsigned.key \
-out /etc/ssl/certs/apache-selfsigned.crt
# Enable SSL module
sudo a2enmod ssl
sudo systemctl restart apache2
```
**Configure Apache for HTTPS:**
```bash
# Edit SSL virtual host
sudo nano /etc/apache2/sites-available/default-ssl.conf
# Enable site
sudo a2ensite default-ssl
sudo systemctl reload apache2
```
**Verify HTTPS Setup:**
```bash
# Check port 443 is open
nmap -p 443 192.168.1.1
# Test SSL connection
openssl s_client -connect 192.168.1.1:443
# Check certificate
curl -kv https://192.168.1.1
```
### 3. Configure SNMP Service (Port 161)
Set up SNMP for enumeration practice:
**Linux SNMP Setup:**
```bash
# Install SNMP daemon
sudo apt install snmpd snmp
# Configure community strings
sudo nano /etc/snmp/snmpd.conf
# Add these lines:
# rocommunity public
# rwcommunity private
# Restart service
sudo systemctl restart snmpd
```
**Windows SNMP Setup:**
1. Open Server Manager → Add Features
2. Select SNMP Service
3. Configure community strings in Services → SNMP Service → Properties
**SNMP Enumeration Commands:**
```bash
# Basic SNMP walk
snmpwalk -c public -v1 192.168.1.1
# Enumerate system info
snmpwalk -c public -v1 192.168.1.1 1.3.6.1.2.1.1
# Get running processes
snmpwalk -c public -v1 192.168.1.1 1.3.6.1.2.1.25.4.2.1.2
# SNMP check tool
snmp-check 192.168.1.1 -c public
# Brute force community strings
onesixtyone -c /usr/share/seclists/Discovery/SNMP/common-snmp-community-strings.txt 192.168.1.1
```
### 4. Configure SMB Service (Port 445)
Set up SMB file shares for enumeration:
**Windows SMB Share:**
1. Create folder to share
2. Right-click → Properties → Sharing → Advanced Sharing
3. Enable sharing and set permissions
4. Configure NTFS permissions
**Linux Samba Setup:**
```bash
# Install Samba
sudo apt install samba
# Create share directory
sudo mkdir -p /srv/samba/share
sudo chmod 777 /srv/samba/share
# Configure Samba
sudo nano /etc/samba/smb.conf
# Add share:
# [public]
# path = /srv/samba/share
# browsable = yes
# guest ok = yes
# read only = no
# Restart service
sudo systemctl restart smbd
```
**SMB Enumeration Commands:**
```bash
# List shares anonymously
smbclient -L //192.168.1.1 -N
# Connect to share
smbclient //192.168.1.1/share -N
# Enumerate with smbmap
smbmap -H 192.168.1.1
# Full enumeration
enum4linux -a 192.168.1.1
# Check for vulnerabilities
nmap --script smb-vuln* 192.168.1.1
```
### 5. Analyze Service Logs
Review logs for security analysis:
**HTTP/HTTPS Logs:**
```bash
# Apache access log
sudo tail -f /var/log/apache2/access.log
# Apache error log
sudo tail -f /var/log/apache2/error.log
# Windows IIS logs
# Location: C:\inetpub\logs\LogFiles\W3SVC1\
```
**Parse Log for Credentials:**
```bash
# Search for POST requests
grep "POST" /var/log/apache2/access.log
# Extract user agents
awk '{print $12}' /var/log/apache2/access.log | sort | uniq -c
```
## Quick Reference
### Essential Ports
| Service | Port | Protocol |
|---------|------|----------|
| HTTP | 80 | TCP |
| HTTPS | 443 | TCP |
| SNMP | 161 | UDP |
| SMB | 445 | TCP |
| NetBIOS | 137-139 | TCP/UDP |
### Service Verification Commands
```bash
# Check HTTP
curl -I http://target
# Check HTTPS
curl -kI https://target
# Check SNMP
snmpwalk -c public -v1 target
# Check SMB
smbclient -L //target -N
```
### Common Enumeration Tools
| Tool | Purpose |
|------|---------|
| nmap | Port scanning and scripts |
| nikto | Web vulnerability scanning |
| snmpwalk | SNMP enumeration |
| enum4linux | SMB/NetBIOS enumeration |
| smbclient | SMB connection |
| gobuster | Directory brute forcing |
## Constraints
- Self-signed certificates trigger browser warnings
- SNMP v1/v2c communities transmit in cleartext
- Anonymous SMB access is often disabled by default
- Firewall rules must allow inbound connections
- Lab environments should be isolated from production
## Examples
### Example 1: Complete HTTP Lab Setup
```bash
# Install and configure
sudo apt install apache2
sudo systemctl start apache2
# Create login page
cat << 'EOF' | sudo tee /var/www/html/login.html
<html>
<body>
<form method="POST" action="login.php">
Username: <input type="text" name="user"><br>
Password: <input type="password" name="pass"><br>
<input type="submit" value="Login">
</form>
</body>
</html>
EOF
# Allow through firewall
sudo ufw allow 80/tcp
```
### Example 2: SNMP Testing Setup
```bash
# Quick SNMP configuration
sudo apt install snmpd
echo "rocommunity public" | sudo tee -a /etc/snmp/snmpd.conf
sudo systemctl restart snmpd
# Test enumeration
snmpwalk -c public -v1 localhost
```
### Example 3: SMB Anonymous Access
```bash
# Configure anonymous share
sudo apt install samba
sudo mkdir /srv/samba/anonymous
sudo chmod 777 /srv/samba/anonymous
# Test access
smbclient //localhost/anonymous -N
```
## Troubleshooting
| Issue | Solution |
|-------|----------|
| Port not accessible | Check firewall rules (ufw, iptables, Windows Firewall) |
| Service not starting | Check logs with `journalctl -u service-name` |
| SNMP timeout | Verify UDP 161 is open, check community string |
| SMB access denied | Verify share permissions and user credentials |
| HTTPS certificate error | Accept self-signed cert or add to trusted store |
| Cannot connect remotely | Bind service to 0.0.0.0 instead of localhost |
## When to Use
This skill is applicable to execute the workflow or actions described in the overview.Related Skills
nextjs-best-practices
Next.js App Router principles. Server Components, data fetching, routing patterns.
neon-postgres
Expert patterns for Neon serverless Postgres, branching, connection pooling, and Prisma/Drizzle integration
nanobanana-ppt-skills
AI-powered PPT generation with document analysis and styled images
multi-agent-patterns
This skill should be used when the user asks to "design multi-agent system", "implement supervisor pattern", "create swarm architecture", "coordinate multiple agents", or mentions multi-agent patterns, context isolation, agent handoffs, sub-agents, or parallel agent execution.
monorepo-management
Build efficient, scalable monorepos that enable code sharing, consistent tooling, and atomic changes across multiple packages and applications.
monetization
Estrategia e implementacao de monetizacao para produtos digitais - Stripe, subscriptions, pricing experiments, freemium, upgrade flows, churn prevention, revenue optimization e modelos de negocio SaaS.
modern-javascript-patterns
Comprehensive guide for mastering modern JavaScript (ES6+) features, functional programming patterns, and best practices for writing clean, maintainable, and performant code.
microservices-patterns
Master microservices architecture patterns including service boundaries, inter-service communication, data management, and resilience patterns for building distributed systems.
mcp-builder
Create MCP (Model Context Protocol) servers that enable LLMs to interact with external services through well-designed tools. The quality of an MCP server is measured by how well it enables LLMs to accomplish real-world tasks.
makepad-skills
Makepad UI development skills for Rust apps: setup, patterns, shaders, packaging, and troubleshooting.
m365-agents-py
Microsoft 365 Agents SDK for Python. Build multichannel agents for Teams/M365/Copilot Studio with aiohttp hosting, AgentApplication routing, streaming responses, and MSAL-based auth.
m365-agents-dotnet
Microsoft 365 Agents SDK for .NET. Build multichannel agents for Teams/M365/Copilot Studio with ASP.NET Core hosting, AgentApplication routing, and MSAL-based auth.